{"title":"Hot Selling Items","description":null,"products":[{"product_id":"hmt-batdoc-apple-battery-activation-tool","title":"HMT Batdoc Apple Laptop MacBook Battery Activation Tool","description":"\u003ch2\u003eHMT BatDoc MacBook Battery Diagnosis \u0026amp; Deep-Sleep Activation Tool\u003c\/h2\u003e\n\u003cp\u003eWhen a MacBook has been stored for months and starts only while connected to its charger, the battery may be in deep sleep or low-voltage protection. HMT BatDoc gives a way to inspect a supported battery’s BMS (battery management system) data and, where appropriate, attempt to wake it before deciding whether replacement is needed. It is a diagnostic and activation tool, not a universal battery repair device.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery-side diagnosis:\u003c\/strong\u003e Communicates with the BMS to check available battery data and whether the battery responds normally.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupported deep-sleep activation:\u003c\/strong\u003e Can attempt to wake a compatible battery in protection after prolonged low voltage; successful recovery is not guaranteed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair verification:\u003c\/strong\u003e Helps technicians compare battery information before and after an activation attempt, then confirm charging and unplugged operation in the MacBook.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfessional MacBook focus:\u003c\/strong\u003e Intended for trained Apple computer repair technicians, not iPhone battery service or DIY use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \/ model:\u003c\/strong\u003e HMT BatDoc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Diagnosis and activation of supported MacBook batteries via their BMS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersions:\u003c\/strong\u003e Basic Version and Advanced Version; confirm the exact model coverage for the selected version in the BatDoc support library.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKnown exclusion in this listing:\u003c\/strong\u003e Battery models A2976, A2977 and 0307S are listed as incompatible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackage Includes\u003c\/h3\u003e\n\u003cp\u003eHMT BatDoc tool in the selected version. Confirm the included adapter cables and power accessories in the selected variant before ordering; use only the matching approved adapter for your battery.\u003c\/p\u003e\n\u003ch3\u003eTarget Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChecking a supported MacBook battery that is not recognized or does not appear to charge after prolonged storage.\u003c\/li\u003e\n\u003cli\u003eInvestigating whether a battery is communicating normally before replacing it or continuing motherboard diagnosis.\u003c\/li\u003e\n\u003cli\u003eAttempting activation of a supported battery in deep sleep or protection, followed by real-world charging and unplugged-operation checks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility \u0026amp; Safety\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBefore connecting:\u003c\/strong\u003e Confirm the exact MacBook and battery model in the BatDoc support library and use the matching adapter. Power off the computer, disconnect its charger and follow ESD-safe repair procedures. Never connect directly to battery cells or guess the connector pinout.\u003c\/p\u003e\n\u003cp\u003eDo not use BatDoc on swollen, leaking, punctured, corroded, overheated or otherwise physically damaged batteries. It cannot repair failed cells, liquid damage or a motherboard short circuit. Stop if the battery shows abnormal heat, voltage, cell imbalance or repeated protection faults. An activation attempt counts as successful only after the MacBook recognizes the battery, charges normally and remains powered when unplugged.\u003c\/p\u003e","brand":"hmttools","offers":[{"title":"Basic Version","offer_id":46396459483193,"sku":"401004-01","price":2099.0,"currency_code":"CNY","in_stock":true},{"title":"Advanced Version","offer_id":46396459450425,"sku":"401004-02","price":3499.0,"currency_code":"CNY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/3915\/3465\/files\/adbd64503fcd5abaff264259d2f44cad.png?v=1787884643"},{"product_id":"desktop-ddr3-ddr4-2-in-1-memory-module-tester","title":"HMT-TT03 Desktop DDR3\/DDR4 Memory Module Tester (Dual Power Supply)","description":"\u003cp\u003eThis 2-in-1 diagnostic tester is designed for desktop DDR3 and DDR4 DIMM memory modules. Separate test slots and LED indicators help technicians check memory modules and identify suspected PCB, resistor-network, open\/short-circuit, or memory-performance faults.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eKey Features\u003c\/p\u003e\n\u003cp\u003e• Supports desktop DDR3 and DDR4 DIMM memory modules\u003c\/p\u003e\n\u003cp\u003e• Two dedicated test slots for DDR3 and DDR4 modules\u003c\/p\u003e\n\u003cp\u003e• LED indicator array for quick fault-position reference\u003c\/p\u003e\n\u003cp\u003e• Type-C power input for convenient bench use\u003c\/p\u003e\n\u003cp\u003e• Added power port design\u003c\/p\u003e\n\u003cp\u003e• USB cable shown included\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNote: Use the matching slot for the memory type and make sure the module is fully seated before testing.\u003c\/p\u003e","brand":"hmttools","offers":[{"title":"Default Title","offer_id":46408132821049,"sku":"401016-03","price":70.0,"currency_code":"CNY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/3915\/3465\/files\/1_a910be05-47ad-4324-add0-65ba81b67fe3.png?v=1788076198"},{"product_id":"hmt-ap85-macbook-lid-angle-sensor-calibration-tool","title":"HMT-AP85 MacBook Lid Angle Sensor Calibration Tool","description":"\u003ch2\u003eRestore Reliable Lid-Angle Sensor Calibration\u003c\/h2\u003e\u003cp\u003eThe HMT-AP85 MacBook Lid Angle Sensor Calibration Tool is designed for technicians and repair professionals who need a focused solution for lid-angle sensor calibration work. It helps bring greater consistency to servicing workflows involving MacBook lid-angle sensing components.\u003c\/p\u003e\u003ch3\u003eWhy Choose the HMT-AP85?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurpose-built for repair work:\u003c\/strong\u003e Designed specifically for MacBook lid-angle sensor calibration tasks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports consistent results:\u003c\/strong\u003e Helps technicians follow a more controlled and repeatable calibration process.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePractical workshop tool:\u003c\/strong\u003e A useful addition to professional electronics repair benches and service kits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearer service workflow:\u003c\/strong\u003e Helps simplify sensor-related maintenance after repair or component replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBuilt for the Repair Bench\u003c\/h3\u003e\u003cp\u003eWhen a MacBook leaves the repair bench, every detail matters. The HMT-AP85 gives technicians a dedicated tool for lid-angle sensor calibration, helping turn a delicate service step into a more organized and dependable part of the repair process.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProduct: HMT-AP85\u003c\/li\u003e\n\u003cli\u003eType: MacBook lid-angle sensor calibration tool\u003c\/li\u003e\n\u003cli\u003eApplication: Professional electronics repair and sensor calibration\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"hmttools","offers":[{"title":"Default Title","offer_id":46434710552633,"sku":"601085-01","price":399.0,"currency_code":"CNY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/3915\/3465\/files\/1_2aaf134e-6c20-4e7e-9000-a0b0019d2e1c.png?v=1788270584"},{"product_id":"hmt-232-wireless-charging-detection-visualization-card","title":"HMT-232 Wireless Charging Detection\/Visualization Card","description":"\u003cp\u003e\u003cstrong\u003eProfessional Wireless Charging Detection \u0026amp; Visualization Card\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe HMT-232 is an innovative, must-have diagnostic tool designed to test and visualize the performance of wireless charging pads and smartphone charging coils. Instantly see magnetic fields in action to verify charging capabilities, pinpoint alignment issues, and troubleshoot power transfer without the need to disassemble devices.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstant Magnetic Visualization:\u003c\/strong\u003e Provides clear, real-time visual feedback of magnetic fields generated by wireless chargers, making it easy to confirm active power output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccurate Alignment Testing:\u003c\/strong\u003e Helps you find the exact \"sweet spot\" on wireless charging pads for optimal charging efficiency and to diagnose dead zones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Compatibility:\u003c\/strong\u003e Works seamlessly with all standard Qi wireless chargers, MagSafe pucks, and smartphone wireless charging coils.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCard-Sized Convenience:\u003c\/strong\u003e Slim, lightweight, and perfectly sized to fit in your wallet or diagnostic toolkit, ensuring it's always ready when you need it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-Destructive Testing:\u003c\/strong\u003e Allows technicians to verify internal wireless charging coil functionality without having to open the smartphone casing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e HMT-232\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Wireless Charging Detection Card\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Testing Qi chargers, MagSafe, and smartphone wireless charging coils\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNote: Simply place the card on the charging pad or the back of a compatible smartphone to visualize the magnetic field.\u003c\/em\u003e\u003c\/p\u003e","brand":"hmttools","offers":[{"title":"Default Title","offer_id":46453971157049,"sku":"111232-04","price":22.0,"currency_code":"CNY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/3915\/3465\/files\/1_3b727689-3f34-42e6-9354-a091387fb479.png?v=1789026923"},{"product_id":"hmt-sj25-8-in-1-apple-watch-flashing-tool","title":"HMT-SJ25 8-in-1 Apple Watch Flashing Tool","description":"\u003ch2\u003eHMT-SJ25 8-in-1 Apple Watch Flashing Tool – Firmware Restore \u0026amp; Diagnostics Jig\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eHMT-SJ25 8-in-1 Apple Watch Flashing Tool\u003c\/strong\u003e is designed to connect seamlessly to the internal diagnostic test points of Apple Watch devices, the HMT-SJ25 provides direct communication with your computer for fast, stable firmware flashing, system recovery, and watchOS reinstallation. Whether you are recovering a bricked device stuck on the Apple logo, bypassing an exclamation mark error screen, or performing diagnostic testing, the HMT-SJ25 delivers the rock-solid connection you need without risking case or display damage.\u003c\/p\u003e\n\u003ch3\u003eKey Features \u0026amp; Advantages\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComprehensive 8-in-1 Compatibility\u003c\/strong\u003e – Unified multi-model support covers modern Apple Watch models including Series 7, Series 8, Series 9, Series 10, Series 11, and Ultra 1, Ultra 2, and Ultra 3.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Gold-Plated Pogo Pins\u003c\/strong\u003e – High-elasticity gold-plated spring probes ensure low resistance, optimal electrical conductivity, and secure contact with delicate diagnostic test pads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccurate Form-Fitting Alignment\u003c\/strong\u003e – CNC-machined positioning grooves guide the watch body and sensor port into place effortlessly, preventing misaligned pins and surface scratching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable High-Speed Data Transfer\u003c\/strong\u003e – Eliminates unexpected disconnections during critical firmware write cycles, significantly reducing the risk of bad flashes or failed restores.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Software Ecosystem Support\u003c\/strong\u003e – Fully compatible with official and third-party flashing utilities (such as iTunes, Apple Configurator, 3uTools, and specialized firmware tools) via USB connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCommon Repair Scenarios \u0026amp; Solutions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoot Loop \u0026amp; Stuck on White Apple Logo\u003c\/strong\u003e – Restore corrupt firmware to bring unbootable watches back to life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed \"!\" Exclamation Mark Screen\u003c\/strong\u003e – Recover devices stuck in restore mode or displaying support.apple.com\/watch\/restore.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Upgrade \/ Downgrade Failures\u003c\/strong\u003e – Re-flash official IPSW firmware after interrupted OTA system updates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouchscreen Unresponsive \/ OS Freeze\u003c\/strong\u003e – Perform a fresh factory reset and firmware re-write when the touch interface cannot be operated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Diagnostics\u003c\/strong\u003e – Read device SN, battery information, and diagnostic logs directly from logic board test points.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the Watch:\u003c\/strong\u003e Carefully access the diagnostic port or hidden contact cover on the Apple Watch chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlign \u0026amp; Seat:\u003c\/strong\u003e Place the Apple Watch into the corresponding HMT-SJ25 positioning dock so the gold probe pins accurately align with the diagnostic contact points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnect to PC:\u003c\/strong\u003e Connect the flashing tool to your Mac or Windows PC using a high-speed data cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnter Recovery \/ DFU Mode:\u003c\/strong\u003e Put the watch into DFU or Recovery mode as instructed by your flashing software (iTunes, Apple Configurator, or 3uTools).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash \u0026amp; Restore:\u003c\/strong\u003e Select the matching firmware (.ipsw) and start the restore process. Keep the watch steady in the jig until the restore is 100% complete.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e HMT-SJ25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e 8-in-1 Apple Watch Flashing Tool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e HuiMinTong (HMT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupported Watch Models:\u003c\/strong\u003e Apple Watch Series 7, Series 8, Series 9, Series 10, Series 11, Apple Watch Ultra, Ultra 2, Ultra 3 (8-in-1)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterface \/ Contact Type:\u003c\/strong\u003e High-precision gold-plated spring pogo pins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Firmware flashing, system restore, DFU unbricking, software recovery, diagnostics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Windows \/ macOS running iTunes, Apple Configurator, or 3uTools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho It's For\u003c\/h3\u003e\n\u003cp\u003eAn indispensable professional diagnostic and flashing tool for mobile repair shops, Apple refurbishing centers, independent micro-soldering technicians, and gadget restoration specialists. Simplify watchOS firmware repair, eliminate contact instability, and restore bricked Apple Watches quickly and reliably with the HMT-SJ25.\u003c\/p\u003e","brand":"hmttools","offers":[{"title":"Default Title","offer_id":46476475564089,"sku":"111125-13","price":1399.0,"currency_code":"CNY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/3915\/3465\/files\/1_1__5.png?v=1789019577"},{"product_id":"hmt-c16-huimintong-apple-watch-screen-separator","title":"HMT-C16 HuiMinTong Apple Watch Screen Separator","description":"\u003cp\u003eApple Watch screens are the least forgiving glass in the repair shop. The case is tiny, the adhesive is stubborn, and one slip of a blade turns a paid repair into a replacement part you eat yourself.\u003c\/p\u003e\u003cp\u003eThe HMT-C16 HuiMinTong Apple Watch Screen Separator gives you a proper grip on that tiny case. It cradles the watch body securely and guides the separation so your blade or wire tracks the adhesive line instead of wandering across the display. Steady hands, repeatable results, fewer write-offs.\u003c\/p\u003e\u003ch3\u003eWhy You'll Like It\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure hold:\u003c\/strong\u003e the watch body sits locked in place so both hands stay free for the actual separation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControlled lift:\u003c\/strong\u003e keeps pressure even across the screen edge instead of concentrated on one corner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLess breakage:\u003c\/strong\u003e a guided path along the adhesive means fewer cracked screens and fewer lost parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaster turnaround:\u003c\/strong\u003e what used to be a nervous ten minutes becomes a routine step in your workflow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBench-ready build:\u003c\/strong\u003e compact enough to leave set up on a busy repair bench all day.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eMade For\u003c\/h3\u003e\u003cp\u003ePhone and watch repair shops, independent technicians, refurbishers, and anyone who opens smartwatches often enough to care about the success rate.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e HuiMinTong (HMT TOOLS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e HMT-C16\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Apple Watch screen separator \/ opening tool\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn The Box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x HMT-C16 Apple Watch Screen Separator\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eNote: manual measurement may have a slight error. Please refer to the actual product for exact dimensions.\u003c\/em\u003e\u003c\/p\u003e","brand":"hmttools","offers":[{"title":"Default Title","offer_id":46521861931065,"sku":"112216","price":850.0,"currency_code":"CNY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/3915\/3465\/files\/1_588a28af-dc9f-480e-b5fe-f8bfc8a02b43.png?v=1789550129"},{"product_id":"b4-pico-ultra-mobile-repair-tool-no-cable-swap-for-flashing-dual-mode-auto-dfu-one-click-pwnd-entry","title":"B4 PICO Ultra Mobile Repair Tool, No Cable Swap for Flashing, Dual Mode Auto DFU, One-Click PWND Entry","description":"\u003ch2\u003eHMT B4 PICO Ultra Mobile Repair Tool – No-Cable-Swap Flashing \u0026amp; Auto DFU \/ PWND Box\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eHMT B4 PICO Ultra Mobile Repair Tool\u003c\/strong\u003e is an advanced hardware flashing and diagnostic dongle engineered for professional smartphone technicians, motherboard repair specialists, and mobile refurbishing facilities. Equipped with dual \u003cstrong\u003eLightning and USB Type-C\u003c\/strong\u003e interfaces, the B4 PICO eliminates tedious manual button combinations and cable-swapping traditionally required to enter Recovery, DFU, and PWND diagnostic modes. Whether you are recovering boot-looping devices, flashing firmware via 3uTools or iTunes, or conducting deep board-level software diagnostics, the B4 PICO delivers fast, stable, one-click operation across both Lightning and Type-C Apple devices directly on your workbench.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Interface (Lightning \u0026amp; USB Type-C):\u003c\/strong\u003e Features built-in Apple Lightning and USB Type-C ports, providing comprehensive plug-and-play connectivity for both classic Lightning devices and modern Type-C iPhones and iPads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless No-Cable-Swap Flashing:\u003c\/strong\u003e Eliminates the need to repeatedly unplug, replug, or swap data cables during complex flashing sequences, firmware upgrades, and recovery cycles, drastically reducing connector wear and connection dropouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Mode Auto DFU Triggering:\u003c\/strong\u003e Features automated dual-mode switching to force devices directly into DFU or Recovery mode without relying on broken, stuck, or unresponsive physical buttons (Power, Volume, or Home keys).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne-Click PWND Entry:\u003c\/strong\u003e Instant one-touch entry into PWND \/ diagnostic mode for supported mobile systems, facilitating fast firmware execution, system restore, and deep diagnostic routines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComprehensive Device Compatibility:\u003c\/strong\u003e Fully compatible with iPhone, iPad, and portable iOS devices across all generations, supporting both Lightning and Type-C ecosystem workflows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Flashing Software Compatibility:\u003c\/strong\u003e Fully compatible with industry-standard repair suites and flashing utilities including 3uTools, iTunes, Apple Configurator, and third-party diagnostic software.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-Compact PICO Form Factor:\u003c\/strong\u003e Engineered into an ultra-portable, durable casing with plug-and-play USB connectivity, occupying minimal bench space while withstanding rigorous daily repair workloads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Circuit Protection:\u003c\/strong\u003e Built-in overcurrent, overvoltage, and anti-static ESD protection safeguards both the host PC and the connected device motherboard against electrical surges during flashing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e B4 PICO Ultra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Mobile Phone Flashing \u0026amp; DFU Diagnostic Tool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterface Ports:\u003c\/strong\u003e Dual Interface – Apple Lightning \u0026amp; USB Type-C (USB-C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupported Devices: \u003c\/strong\u003eiPhone XR, XS, XS Max, 11, 11 Pro, 11 Pro Max, SE2\u003cbr\u003eiPad mini 5 \/ Air 3 \/ iPad 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDevice Compatibility:\u003c\/strong\u003e Lightning and Type-C iPhone \u0026amp; iPad models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 101150-02\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow It Works \u0026amp; Operating Guide\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep 1 (Connection):\u003c\/strong\u003e Connect the B4 PICO to your PC's USB port and attach the target mobile device via the appropriate Lightning or USB Type-C port.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep 2 (Mode Selection):\u003c\/strong\u003e Launch your preferred flashing software (e.g., 3uTools or iTunes). Use the mode switch on the B4 PICO to trigger automatic DFU or Recovery mode—no manual button pressing required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep 3 (PWND \/ Diagnostic Execution):\u003c\/strong\u003e For deep diagnostic, unlocking, or recovery operations, trigger the one-click PWND function to put the device into target mode instantly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep 4 (Firmware Restore \/ Flashing):\u003c\/strong\u003e Execute firmware flashing, data recovery, or unbricking operations with rock-solid data line stability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackage Includes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × HMT B4 PICO Ultra Mobile Repair Tool (Lightning \u0026amp; Type-C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTarget Applications\u003c\/h3\u003e\n\u003cp\u003eEssential for mobile phone repair shops, motherboard unbricking technicians, refurbishing facilities, and data recovery specialists dealing with boot loops, broken buttons, corrupted firmware, and diagnostic bypass workflows.\u003c\/p\u003e","brand":"hmttools","offers":[{"title":"Default Title","offer_id":48925128392761,"sku":"101150-02","price":48.0,"currency_code":"CNY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/3915\/3465\/files\/5_2e16d4d5-bbd7-4b78-9cc6-c630c153a41b.png?v=1789812224"},{"product_id":"weixiuzhe-ptv1-high-precision-multi-function-smart-power-supply","title":"WEIXIUZHE PTV1 High Precision Multi-Function Smart Power Supply","description":"\u003ch2\u003eWEIXIUZHE PTV1 High-Precision Multi-Function AI Smart PD Power Supply\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWEIXIUZHE PTV1 High-Precision Multi-Function Smart Power Supply\u003c\/strong\u003e (jointly developed by WEIXIUZHE \u0026amp; FANGXINKEJI) is an ultra-compact, portable intelligent DC power source and diagnostic analyzer engineered specifically for mobile phone repair technicians, motherboard specialists, and electronics rework benches. Featuring an advanced AI current data analysis engine, 0.1mA micro-current measurement resolution, local waveform recording and playback, and 1:1 real-time PC screen casting, the PTV1 transforms motherboard troubleshooting and boot fault isolation into a fast, visual, and highly scientific workflow.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAI Current Data \u0026amp; Fault Analysis:\u003c\/strong\u003e Equipped with an intelligent curve-matching algorithm that compares real-time device power-up curves against standard boot profiles (such as iPhone and mainstream smartphone models), instantly reporting diagnostic conclusions (e.g., \"Normal Power On\"), curve similarity percentage, and confidence ratings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.1mA Ultra-High Current Resolution:\u003c\/strong\u003e Delivers high-sensitivity current detection down to 0.1mA, allowing technicians to capture subtle standby leakages, micro-shorts, and low-current initialization stages effortlessly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaveform Data Local Recording \u0026amp; Playback:\u003c\/strong\u003e Features onboard trace caching that allows technicians to pause real-time waveforms and rotate the encoder knob to scroll back, zoom, and inspect dynamic current spikes millisecond by millisecond.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Display Modes:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eDigital Readout Mode:\u003c\/em\u003e Large, high-visibility digits displaying Voltage (V), Current (A\/mA), and Power (W).\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFlexible Needle Pointer Mode:\u003c\/em\u003e Simulates classic analog needle meters with selectable multi-range scales (0–50mA, 0–100mA, 0–500mA, 0–1A, 0–2A) for intuitive observation of current fluctuations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWaveform Curve Mode:\u003c\/em\u003e Real-time dynamic graph supporting Full Display, Voltage Curve Only, or Current Curve Only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:1 Screen Casting \u0026amp; Bidirectional Master-Slave Control:\u003c\/strong\u003e Connects to a PC via USB for real-time 1:1 screen mirroring and projection (ideal for teaching and workshop displays). Technicians can also modify output voltage, current limits, and parameters directly from the PC platform.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Multi-Channel Output Layout:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eCH1 \/ CH2 \/ CH3:\u003c\/em\u003e 3 × USB-A fast-charging output ports supporting multiple fast-charging protocols.\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCH4:\u003c\/em\u003e Standard heavy-duty banana plug terminal jacks (Negative \u0026amp; Positive) for motherboard boot cables and test clips.\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCH5:\u003c\/em\u003e High-speed Type-C output port.\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eQuick Output Presets:\u003c\/em\u003e One-touch switching between frequently used repair voltages (such as 1.80V 3.60A, 4.30V 5.00A, 7.80V 5.00A).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible PD \/ Power Bank Powering:\u003c\/strong\u003e Powered via standard Type-C PD\/QC fast charging protocol or DC input—can be driven by a PD fast charger or directly from a high-capacity power bank, making it portable and suitable for outdoor and on-site repair jobs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime Free Firmware Upgrades:\u003c\/strong\u003e Supports continuous bootloader, application, and database upgrades to expand phone model support and diagnostic features over time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e PTV1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e WEIXIUZHE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Intelligent Multi-Function PD DC Regulated Power Supply \u0026amp; AI Curve Analyzer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Input:\u003c\/strong\u003e Type-C PD\/QC Fast Charging Protocol Input \u0026amp; DC IN (Power Bank Compatible)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Resolution:\u003c\/strong\u003e 0.1mA Ultra-High Precision\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Channels:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eCH1, CH2, CH3: USB-A Fast Charging Output\u003c\/li\u003e\n\u003cli\u003eCH4: Banana Plug Output Jacks (- \/ +)\u003c\/li\u003e\n\u003cli\u003eCH5: Type-C Output Port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e Full-Color Digital Display (Digital Mode \/ Needle Pointer Mode \/ Waveform Curve Mode)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeedle Scale Ranges:\u003c\/strong\u003e 0~50mA, 0~100mA, 0~500mA, 0~1A, 0~2A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHost Unit Dimensions:\u003c\/strong\u003e 105 mm × 75 mm × 35 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging Box Dimensions:\u003c\/strong\u003e 160 mm × 108 mm × 50 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 123065-03\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackage Includes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × WEIXIUZHE PTV1 Smart PD Power Supply Main Unit\u003c\/li\u003e\n\u003cli\u003e1 × High-Grade Banana Plug Output Test Cable\u003c\/li\u003e\n\u003cli\u003e1 × Type-C Connection \/ Power Cable\u003c\/li\u003e\n\u003cli\u003e1 × Premium Packaging Box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTarget Applications\u003c\/h3\u003e\n\u003cp\u003eIndispensable for mobile phone repair shops, motherboard unbricking technicians, electronics rework labs, on-site field repair engineers, and technical training institutions.\u003c\/p\u003e","brand":"hmttools","offers":[{"title":"Default Title","offer_id":48925808492601,"sku":"123065-03","price":258.0,"currency_code":"CNY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/3915\/3465\/files\/6_8142d9fb-8ff2-44f9-b69a-71427c52ceaa.png?v=1789813837"},{"product_id":"oss-team-t9-intelligent-tail-plug-tester-mobile-phone-detection-automatic-lock-fault-point-mobile-phone-charging-port-tester","title":"OSS TEAM T9 Intelligent Mobile Phone Tail Plug \u0026 Charging Port Tester","description":"\u003ch2\u003eOSS TEAM T9 Intelligent Charging Port Tester\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eOSS TEAM T9 Intelligent Tail Plug Tester\u003c\/strong\u003e is a fast diagnostic tool designed for smartphone repair technicians. It scans charging port pins without disassembling the device, automatically locking onto faulty pins, open circuits, and abnormal diode readings in seconds.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNo-Disassembly Diagnostics:\u003c\/strong\u003e Quickly tests smartphone charging ports directly through external connectors without opening the device housing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAuto Fault-Point Locking:\u003c\/strong\u003e Automatically scans pins (VBUS, GND, CC1, CC2, D+, D-) and locks onto the abnormal line for rapid troubleshooting.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePin Diode \u0026amp; Resistance Detection:\u003c\/strong\u003e Measures line continuity, ground resistance, and diode drop values to pinpoint open circuits and micro-shorts.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual-Interface Compatibility:\u003c\/strong\u003e Supports mainstream Type-C and Lightning interfaces for comprehensive iPhone and Android diagnostics.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompact Handheld Design:\u003c\/strong\u003e Ultra-portable form factor weighing only ~50g, ideal for intake triage and workbench repair.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e OSS TEAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e T9\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Intelligent Mobile Charging Port \/ Tail Plug Tester\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible Ports:\u003c\/strong\u003e USB Type-C \u0026amp; Lightning\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDetection Modes:\u003c\/strong\u003e Open Circuit, Short Circuit, Diode Drop, Auto Fault-Lock\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approx. 50g\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 111238\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePackage Includes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × OSS TEAM T9 Intelligent Tail Plug Tester\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTarget Applications\u003c\/h3\u003e\n\u003cp\u003eNon-invasive smartphone charging port diagnostics, intake bench triage, and logic board circuit troubleshooting.\u003c\/p\u003e","brand":"hmttools","offers":[{"title":"Default Title","offer_id":48938384064569,"sku":"111238","price":68.8,"currency_code":"CNY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/3915\/3465\/files\/Se1961b66e7f8449e9939d2cd5efa717b0.webp?v=1789958786"},{"product_id":"oss-s115pro-power-output-cable-for-mobile-phone-repair-compatible-with-iphone-android","title":"WEMON S115 \/ S115 Pro Power Boot Cable for iPhone \u0026 Android","description":"\u003ch2\u003eWEMON S115 \/ S115 Pro Power Boot Cable for iPhone \u0026amp; Android\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWEMON S115 \/ S115 Pro Power Boot Cable\u003c\/strong\u003e is a professional DC power supply test cable engineered for mobile phone motherboard diagnostics. Connecting directly to benchtop DC power supplies via banana plugs, it powers motherboards without a battery across iPhone 7\/8–17 Pro Max and over 4,800 Android devices with smart IC anti-burn protection.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtensive Phone Compatibility:\u003c\/strong\u003e Supports iPhone 7\/8 up to iPhone 17 Pro Max\/17 Air plus 15 universal Android battery connectors (CA1–CA5, CA7–CA16), covering 4,800+ smartphone models.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTwo Cable Configurations:\u003c\/strong\u003e Available in \u003cstrong\u003eS115 Pro\u003c\/strong\u003e (ultra-flexible FPC ribbon cable) and \u003cstrong\u003eS115\u003c\/strong\u003e (sturdy rigid terminal connectors).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSmart IC \u0026amp; Auto-Polarity Protection:\u003c\/strong\u003e Features intelligent constant voltage\/current regulation, automatic anti-burn IC, and automatic polarity recognition to prevent reverse connection damage.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBuzzer Alarm \u0026amp; Dual LED Indicators:\u003c\/strong\u003e Features a green normal power LED, red short-circuit warning LED, and an audible buzzer alarm that sounds instantly upon detecting a board short.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBattery Protocol Simulation \u0026amp; Ammeter Port:\u003c\/strong\u003e Built-in resistor networks prevent rebooting and error prompts; side jack allows connecting an external analog ammeter for current curve analysis.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e WEMON\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e S115 \/ S115 Pro\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e iPhone (7\/8–17 Pro Max \u0026amp; 17 Air) \u0026amp; 4,800+ Android Models (Huawei, Xiaomi, Samsung, OPPO, VIVO, etc.)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInput Interface:\u003c\/strong\u003e Standard Red\/Black Banana Plugs (DC Power Supply)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSafety Protections:\u003c\/strong\u003e Anti-Burn IC, Overvoltage, Overcurrent, Polarity Auto-Recognition, Short Buzzer Alert\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExpansion Port:\u003c\/strong\u003e External Pointer Current Meter Jack\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariants \u0026amp; SKUs:\u003c\/strong\u003e S115 Pro (FPC Cable: 101021-04) | S115 (Hard Terminal: 101021-05)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePackage Includes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × WEMON Power Boot Cable (Selected Model: S115 or S115 Pro)\u003c\/li\u003e\n  \u003cli\u003e1 × Pair of Alligator Test Clips\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTarget Applications\u003c\/h3\u003e\n\u003cp\u003eBattery-free phone motherboard boot testing, short-circuit troubleshooting, current curve diagnostics, and mobile repair workshop servicing.\u003c\/p\u003e","brand":"hmttools","offers":[{"title":"WEMON S115Pro (Apple \u0026 Android Power-On Cable) 8-17PM (FPC Flex Cable)","offer_id":50513551163449,"sku":"101021-04","price":64.8,"currency_code":"CNY","in_stock":true},{"title":"WEMON S115 Apple Android Power Boot Cable Supports IP7-17PM (Hard Terminal)","offer_id":50513551196217,"sku":"101021-05","price":62.8,"currency_code":"CNY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/3915\/3465\/files\/5_5e45db97-624c-47e7-b139-984df5017d8b.png?v=1789981734"},{"product_id":"oss-team-w01-v2-0-inductance-tester","title":"OSS TEAM W01 V2.0 Inductance Tester","description":"\u003ch2\u003eOSS TEAM W01 V2.0 Electromagnetic Inductance Tester\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eOSS TEAM W01 V2.0 Inductance Tester\u003c\/strong\u003e is a high-efficiency diagnostic tool designed for smartphone, laptop, and circuit board repair. Utilizing electromagnetic induction sensing, it instantly detects the operating status of SMD power inductors and buck\/boost coils without desoldering.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eElectromagnetic Induction Sensing:\u003c\/strong\u003e Non-invasively captures high-frequency magnetic fields from active inductors to verify circuit operation without damaging the board.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMicrosecond Instant Response:\u003c\/strong\u003e Rapidly sweeps across SMD coils on high-density logic boards to locate inactive or failing power phases in seconds.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual-LED Status Display:\u003c\/strong\u003e Features a solid Blue LED for power status and a bright Green LED that illuminates when an active coil is detected.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOne-Touch Push Button Testing:\u003c\/strong\u003e Equipped with an onboard tactile switch for stable, on-demand testing with low power consumption.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision Induction Tip:\u003c\/strong\u003e Slender probe easily reaches tightly packed SMD components around CPUs, PMICs, and backlight drivers; powered via standard 5V Type-C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e OSS TEAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e W01 V2.0\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e In-Circuit Electromagnetic Inductance Tester\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower Interface:\u003c\/strong\u003e USB Type-C (5V)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStatus Indicators:\u003c\/strong\u003e Blue LED (Power), Green LED (Active Coil)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 75 mm × 30 mm (2.95 in × 1.18 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e iPhone, Android, tablet, and PC motherboards\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 111227-08\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePackage Includes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × OSS TEAM W01 V2.0 Inductance Tester Board\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTarget Applications\u003c\/h3\u003e\n\u003cp\u003eSmartphone motherboard repair, laptop power rail diagnostics, PMIC phase inspection, and in-circuit SMD coil troubleshooting.\u003c\/p\u003e","brand":"hmttools","offers":[{"title":"Default Title","offer_id":50520355536953,"sku":"111227-08","price":9.8,"currency_code":"CNY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/3915\/3465\/files\/1_eda98dd7-c804-4769-a2e0-1dabf0dd7d3a.jpg?v=1790053612"},{"product_id":"wemon-k21a-digital-soldering-station-75w-t210-c210-tip","title":"WEMON K21A Digital Soldering Station 75W T210 C210 Tip","description":"\u003ch2\u003eWEMON K21A 75W Digital Precision Soldering Station\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWEMON K21A Digital Soldering Station\u003c\/strong\u003e is a 75W high-power precision workstation built for micro-soldering and logic board repair. Compatible with T210 handles and C210 cartridge tips, it delivers rapid 2-second heat-up, intelligent standby sleep, and rock-solid temperature stability.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e75W Rapid 2-Second Heating:\u003c\/strong\u003e High-performance heating system reaches target soldering temperature in just 2 seconds with rapid thermal recovery under heavy loads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eC210 \/ T210 Micro-Soldering Support:\u003c\/strong\u003e Compatible with standard T210 handles and ultra-fine C210 tips, ideal for precision phone motherboard and SMD component rework.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDigital Temperature Display:\u003c\/strong\u003e Clear digital screen provides real-time temperature monitoring and precise temperature adjustment from 100°C to 450°C.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntelligent Auto-Sleep Stand:\u003c\/strong\u003e Handle stand features magnetic sleep sensing that instantly cools down upon docking, prolonging tip lifespan and saving power.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated Stand \u0026amp; Tip Cleaner:\u003c\/strong\u003e All-in-one stand incorporates a quick-swap tip bracket, copper wire ball, and cleaning sponge for seamless workbench efficiency.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e WEMON\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e K21A\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 75W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTemperature Range:\u003c\/strong\u003e 100°C – 450°C (212°F – 842°F)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible Handle \u0026amp; Tips:\u003c\/strong\u003e T210 Handle \/ C210 Series Tips\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAvailable Standards:\u003c\/strong\u003e US Standard (110V) \/ EU Standard (220V)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 112387-04 (US) \/ 112387-01 (EU)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePackage Includes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × WEMON K21A Soldering Station Main Unit\u003c\/li\u003e\n  \u003cli\u003e1 × T210 Precision Soldering Handle\u003c\/li\u003e\n  \u003cli\u003e1 × C210 Soldering Iron Tip\u003c\/li\u003e\n  \u003cli\u003e1 × Sleep Stand with Cleaning Copper Wire \u0026amp; Sponge\u003c\/li\u003e\n  \u003cli\u003e1 × Power Cable (US or EU Standard)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTarget Applications\u003c\/h3\u003e\n\u003cp\u003ePrecision micro-soldering, smartphone motherboard BGA rework, jump-wire soldering, and electronics lab repair.\u003c\/p\u003e","brand":"hmttools","offers":[{"title":"US Standard","offer_id":50520983142457,"sku":"112387-04","price":148.0,"currency_code":"CNY","in_stock":true},{"title":"EU Standard","offer_id":50520983175225,"sku":"112387-01","price":148.0,"currency_code":"CNY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/3915\/3465\/files\/3034a1133efe01daba919094b70c6310_9c168f88-4606-49f3-afe2-edead02a91e2.jpg?v=1790062679"},{"product_id":"hmt-pr11-dc-power-supply-13v-5a","title":"HMT-PR11 Portable PD Power Supply","description":"\u003ch2\u003eHMT-PR11 Portable PD Power Supply for Mobile \u0026amp; Electronics Repair\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eHMT-PR11 Portable PD Power Supply\u003c\/strong\u003e is an intelligent, high-precision DC power supply engineered specifically for mobile phone technicians, micro-soldering professionals, and on-site repair specialists. Combining maximum 13V \/ 7A output with a vivid 2.4-inch IPS color display and power-bank compatibility, it delivers laboratory-grade diagnostics in an ultra-compact, portable form factor.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2.4\" IPS Screen \u0026amp; Timeline Waveform Replay:\u003c\/strong\u003e High-definition color display with intuitive knob controls lets you scroll and replay boot current waveforms just like a video timeline, making subtle current spikes and boot failures easy to identify.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAI Current Waveform Analysis:\u003c\/strong\u003e Built-in intelligent waveform diagnostics analyze boot current patterns to quickly diagnose logic board faults, leakage, and power rail anomalies.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1:1 Real-Time PC Screen Mirroring:\u003c\/strong\u003e Broadcasts real-time voltage, current, and waveform graphs directly to your computer screen—perfect for repair livestreams, remote technical training, and workbench recording.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBidirectional PC Control:\u003c\/strong\u003e Adjust output voltage and current limits directly from your PC workstation using your mouse for fast, effortless bench testing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMax 13V \/ 7A Output \u0026amp; 17PM Support:\u003c\/strong\u003e Delivers robust power up to 13V and 7A, fully capable of powering high-demand modern smartphones including iPhone 17 Pro Max.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBuilt-In Burn-In Short-Killer Function:\u003c\/strong\u003e Dedicated short-circuit detection mode allows technicians to inject precise low-voltage current to quickly pinpoint and locate shorted capacitors and hot spots.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual USB Outputs \u0026amp; Full Multi-Layer Protection:\u003c\/strong\u003e Features dual USB output ports alongside comprehensive hardware safeguards against over-current (OCP), over-temperature (OTP), and overload.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUltra-Portable PD Power Input:\u003c\/strong\u003e Easily powered by any standard USB-C PD power bank or PD adapter, making it the ultimate tool for on-site repairs and mobile fieldwork.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e HMT-PR11\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Portable Intelligent PD DC Power Supply\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e 2.4-inch IPS Color Screen\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eControl Mode:\u003c\/strong\u003e Precision Rotary Knob \u0026amp; Bidirectional PC Control\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMax Output Voltage:\u003c\/strong\u003e Up to 13V\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMax Output Current:\u003c\/strong\u003e Up to 7A\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower Input:\u003c\/strong\u003e USB Type-C PD Protocol (Power Bank \/ PD Charger compatible)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePC Connectivity:\u003c\/strong\u003e 1:1 Live Mirroring \u0026amp; Real-Time Mouse Control\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiagnostic Features:\u003c\/strong\u003e AI Waveform Analysis, Waveform Timeline Playback, Short-Circuit Burn-In\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutput Interfaces:\u003c\/strong\u003e Banana Jacks \/ Main DC Output + Dual USB Ports\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSafety Protections:\u003c\/strong\u003e Over-Current, Over-Temperature, Overload Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePackage Includes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x HMT-PR11 Portable PD Power Supply\u003c\/li\u003e\n  \u003cli\u003e1 x Type-C Power \/ Data Cable\u003c\/li\u003e\n  \u003cli\u003e1 x User Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTarget Applications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSmartphone, tablet, and logic board fault diagnosis, boot sequence current monitoring, motherboard short-circuit troubleshooting, and repair livestreaming demonstrations.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"hmttools","offers":[{"title":"Default Title","offer_id":50752430800953,"sku":"113011","price":218.0,"currency_code":"CNY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/3915\/3465\/files\/PR11.png?v=1791779800"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/3915\/3465\/collections\/1_2cbf66d9-cd62-4b06-a045-5227caf7636b.png?v=1789456741","url":"https:\/\/hmttools.net\/en\/collections\/proven-bestsellers.oembed","provider":"hmttools","version":"1.0","type":"link"}